View STP5NK90Z_2872102.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/12 september 2005 STP5NK90Z stf5nk90z n-channel 900v - 2 ? - 4.5a to-220/to-220fp zener-protected supermesh?mosfet table 1: general features typical r ds (on) = 2 ? extremely high dv/dt capability improved esd capability 100% avalanche rated gate charge minimized very low intrinsic capacitances very good manufacturing repeatibility description the supermesh? series is obtained through an extreme optimization of st?s well established stripbased powermesh? layout. in addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. such series complements st full range of high voltage mos- fets including revolutionary mdmesh? products. applications high current, high speed switching ideal for off-line power supplies, adaptors and pfc table 2: order codes figure 1: package figure 2: internal schematic diagram type v dss r ds(on) i d pw STP5NK90Z stf5nk90z 900 v 900 v < 2.5 ? < 2.5 ? 4.5 a 4.5 a (*) 125 w 30 w to-220fp to-220 1 2 3 sales type marking package packaging STP5NK90Z p5nk90z to-220 tube stf5nk90z f5nk90z to-220fp tube rev. 3
STP5NK90Z - stf5nk90z 2/12 table 3: absolute maximum ratings ( ) pulse width limited by safe operating area (1) i sd 4. 5a, di/dt 200a/s, v dd v (br)dss , t j t jmax. (*) limited only by maximum temperature allowed table 4: thermal data table 5: avalanche characteristics table 6: gate-source zener diode protection features of gate-to-source zener diodes the built-in back-to-back zener diodes have specifically been designed to enhance not only the device ? s esd capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. in this respect the zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device ? s integrity. these integrated zener diodes thus avoid the usage of external components. symbol parameter value unit STP5NK90Z stf5nk90z v ds drain-source voltage (v gs = 0) 900 v v dgr drain-gate voltage (r gs = 20 k ? ) 900 v v gs gate- source voltage 30 v i d drain current (continuous) at t c = 25 c 4.5 4.5 (*) a i d drain current (continuous) at t c = 100 c 2.8 2.8 (*) a i dm ( ) drain current (pulsed) 18 18 (*) a p tot total dissipation at t c = 25 c 125 30 w derating factor 1 0.24 w/ c v esd(g-s) gate source esd(hbm-c=100pf, r=1.5k ?) 4000 v dv/dt (1) peak diode recovery voltage slope 4.5 v/ns v iso insulation withstand voltage (dc) - 2500 v t j t stg operating junction temperature storage temperature -55 to 150 -55 to 150 c c to-220 to-220fp rthj-case thermal resistance junction-case max 1 4.2 c/w rthj-amb thermal resistance junction-ambient max 62.5 c/w t l maximum lead temperature for soldering purpose 300 c symbol parameter max value unit i ar avalanche current, repetitive or not-repetitive (pulse width limited by t j max) 4.5 a e as single pulse avalanche energy (starting t j = 25 c, i d = i ar , v dd = 50 v) 230 mj symbol parameter test conditions min. typ. max. unit bv gso gate-source breakdown voltage igs= 1ma (open drain) 30 v
3/12 STP5NK90Z - stf5nk90z electrical characteristics (t case =25 c unless otherwise specified) table 7: on /off table 8: dynamic table 9: source drain diode (1) pulsed: pulse duration = 300 s, duty cycle 1.5 %. (2) pulse width limited by safe operating area. (3) c oss eq. is defined as a constant equivalent capacitance giving the same charging time as c oss when v ds increases from 0 to 80% v dss . symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 1 ma, v gs = 0 900 v i dss zero gate voltage drain current (v gs = 0) v ds = max rating v ds = max rating, t c = 125 c 1 50 a a i gss gate-body leakage current (v ds = 0) v gs = 20 v 10 a v gs(th) gate threshold voltage v ds = v gs , i d = 100 a 3 3.75 4.5 v r ds(on static drain-source on resistance v gs = 10 v, i d = 2.25 a 2 2.5 ? symbol parameter test conditions min. typ. max. unit g fs (1) forward transconductance v ds = 15 v , i d = 2.25 a 4.8 s c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds = 25 v, f = 1 mhz, v gs = 0 1160 105 21.5 pf pf pf c oss eq (3) . equivalent output capacitance v gs = 0 v, v ds = 0 to 720 v 65.5 pf t d(on) t r t d(off) t f turn-on delay time rise time turn-off-delay time fall time v dd = 450 v, i d = 2.2 a, r g = 4.7 ?, v gs = 10 v (see figure 19) 27 7.2 52 19 ns ns ns ns q g q gs q gd total gate charge gate-source charge gate-drain charge v dd = 720 v, i d = 4.4 a, v gs = 10 v (see figure 22) 41.5 6.9 21.9 58 nc nc nc symbol parameter test conditions min. typ. max. unit i sd i sdm (2) source-drain current source-drain current (pulsed) 4.5 18 a a v sd (1) forward on voltage i sd = 4.5 a, v gs = 0 1.6 v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd = 4.5 a, di/dt = 100 a/s v dd = 35v (see figure 20) 518 3.2 12.2 ns c a t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd = 4.5 a, di/dt = 100 a/s v dd = 35v, t j = 150 c (see figure 20) 712 4.66 13.1 ns c a
STP5NK90Z - stf5nk90z 4/12 figure 3: safe operating area for to-220 figure 4: safe operating area for to-220fp figure 5: output characteristics figure 6: thermal impedance for to-220 figure 7: thermal impedance for to-220fp figure 8: transfer characteristics
5/12 STP5NK90Z - stf5nk90z figure 9: transconductance figure 10: gate charge vs gate-source voltage figure 11: normalized gate threshold voltage vs temperature figure 12: static drain-source on resistance figure 13: capacitance variations figure 14: normalized on resistance vs tem- perature
STP5NK90Z - stf5nk90z 6/12 figure 15: source-drain forward characteris- tics figure 16: normalized breakdown voltage vs temperature figure 17: avalanche energy vs starting tj
7/12 STP5NK90Z - stf5nk90z figure 18: unclamped inductive load test cir- cuit figure 19: switching times test circuit for resistive load figure 20: test circuit for inductive load switching and diode recovery times figure 21: unclamped inductive wafeform figure 22: gate charge test circuit
STP5NK90Z - stf5nk90z 8/12 in order to meet environmental requirements, st offers these devices in ecopack ? packages. these packages have a lead-free second level interconnect . the category of second level interconnect is marked on the package and on the inner box label, in compliance with jedec standard jesd97. the maximum ratings related to soldering conditions are also marked on the inner box label. ecopack is an st trademark. ecopack specifications are available at: www.st.com
9/12 STP5NK90Z - stf5nk90z l2 a b d e h g l6 f l3 g1 123 f2 f1 l7 l4 l5 dim. mm. inch min. typ max. min. typ. max. a 4.4 4.6 0.173 0.181 b 2.5 2.7 0.098 0.106 d 2.5 2.75 0.098 0.108 e 0.45 0.7 0.017 0.027 f 0.75 1 0.030 0.039 f1 1.15 1.7 0.045 0.067 f2 1.15 1.7 0.045 0.067 g 4.95 5.2 0.195 0.204 g1 2.4 2.7 0.094 0.106 h 10 10.4 0.393 0.409 l2 16 0.630 l3 28.6 30.6 1.126 1.204 l4 9.8 10.6 .0385 0.417 l5 2.9 3.6 0.114 0.141 l6 15.9 16.4 0.626 0.645 l7 9 9.3 0.354 0.366 ? 3 3.2 0.118 0.126 to-220fp mechanical data
STP5NK90Z - stf5nk90z 10/12 dim. mm. inch min. typ max. min. typ. max. a 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 d 15.25 15.75 0.60 0.620 e 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 f 1.23 1.32 0.048 0.052 h1 6.20 6.60 0.244 0.256 j1 2.40 2.72 0.094 0.107 l 13 14 0.511 0.551 l1 3.50 3.93 0.137 0.154 l20 16.40 0.645 l30 28.90 1.137 ? p 3.75 3.85 0.147 0.151 q 2.65 2.95 0.104 0.116 to-220 mechanical data
11/12 STP5NK90Z - stf5nk90z table 10: revision history date revision description of changes 24-sep-2004 1 first release. 05-oct-2004 2 complete datasheet 06-sep-2005 3 inserted ecopack indication
STP5NK90Z - stf5nk90z 12/12 information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publicati on are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of stmicroelectro nics. the st logo is a registered trademark of stmicroelectronics all other names are the property of their respective owners ? 2005 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america

▲Up To Search▲

Price & Availability of STP5NK90Z

	To Download STP5NK90Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .